Product ID:ETHYLENE GLYCOL DI-N-BUTYL ETHER, E0217
MSDS Date:01/09/1997
FSC:6810
NIIN:00N086591
MSDS Number: CHJJL

TCI AMERICA

9211 NORTH HARBORGATE ST
PORTLAND, OR 97203
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-423-8616

Cage: 041D5

TCI AMERICA

PORTLAND, OR 97203 US

Telephone: 800-423-8616

Cage: 041D5

3250

CAS: 112-48-1

RTECS: KH9450000

Fraction By Weight: >98%

OSHA PEL N/K

ACGIH TLV: N/K

IF NOT BRTHG, PERFORM ARTF RESP. LOOSEN

RTECS: 9999999ZZ

BRTHG IS DFCLT, OXYGEN CAN BE ADMINISTERED. SEEK MED

RTECS: 9999999ZZ

REMOVE DENTURES IF ANY. HAVE CONSCIOUS

RTECS: 9999999ZZ

BY STICKING FINGER IN THROAT. LOWER HEAD SO THAT

RTECS: 9999999ZZ

UNCONSCIOUS PERSON ANYTHING TO INGEST. SEEK MEDICAL

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENT 1.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN AND EYE CONTACT MAY RESULT
IN IRRITATION. MAY BE HARMFUL IF INHALED OR INGESTED. CHRONIC:
REPEATED OR PROLONGED EXPOSURE CAN PRODUCE TARGET ORGANS DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: CHECK FOR & REMOVE ANY CONT LENSES. DO NOT USE EYE
OINTMENT. FLUSH EYES W/RUNNING WATER FOR AT LEAST 15 MIN, OCCAS
LIFTING UPPER & LOWER LIDS. SEEK MED ATTN. TREAT SYMPTOMATICALLY &
SUPPORTIVELY . SKIN: IF CHEM GETS SPILLED ON CLOTHEDPORTION OF
BODY, REMOVE CONTAM CLOTHES AS QUICKLY AS POSS, PROTECTING YOUR OWN
HANDS & BODY. PLACE VICTIM UNDER DELUGE SHOWER. IF CHEM TOUCHES
VICTIM'S(SUP DAT)

Flash Point:185F,85C
Extinguishing Media:SMALL FIRES: DRY CHEMICAL, CARBON DIOXIDE, WATER
SPRAY/FOAM. LARGE FIRES: WATER SPRAY, FOG/FOAM. DO NOT USE WATER
JET.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:COMBUSTIBLE MATERIAL. KEEP AWAY FROM HEAT AND
SOURCES OF IGNITION. MECHANICAL EXHAUST REQUIRED. STOP LEAK IF
WITHOUT RISK. FINISH CLEANING THE SPILL BY RINSING ANY CONTAMINATED
SURFACES WITH COPIOUS A MOUNTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT & SOURCES OF
IGNIT. MECH EXST REQUIRED. WHEN NOT IN USE, TIGHTLY SEAL CONTR &
STORE IN DRY, COOL PLACE. AVOID EXCESS HEAT & LIGHT.
Other Precautions:DO NOT BREATHE GAS, FUMES, VAP/SPRAY. IN CASE OF
INSUFFICIENT VENT, WEAR SUITABLE NIOSH APPRVD RESP EQUIP. IF YOUR
FEEL UNWELL, SEEK MED ATTN & SHOW LABEL WHEN POSS. ALWAYS STORE
AWAY FROM INCOMPATIBL E COMPOUNDS SUCH AS OXIDIZING AGENTS.

Respiratory Protection:A NIOSH APPROVED RESPIRATOR SHOULD BE USED TO
AVOID INHALATION OF THE PRODUCT.
Ventilation:PROVIDE EXHAUST VENT/OTHER ENGINEERING CONTROLS TO KEEP
AIRBORNE CONCENTRATIONS OF VAPORS BELOW THEIR RESPECTIVE TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . LAB COAT. BOOTS.
Work Hygienic Practices:SUGGESTED PROTECTIVE CLOTHING MIGHT NOT BE
SUFFICIENT; CONSULT A SPECIALIST BEFORE HANDLING THIS PRODUCT.
Supplemental Safety and Health
FIRST AID PROC: EXPOSED SKIN, SUCH AS HANDS, GENTLY & THORO WASH CONTAM
SKIN W/RUNNING WATER & NON-ABRASIVE SOAP. BE PARTICULARLY CAREFUL
TO CLEAN FOLDS, CREVICES, CREASES & GROIN. COVER IRRITATED SKI N
W/EMOLLIENT. SEEK MED ATTN. TREAT SYMPTOMATICALLY & SUPPORTIVELY.
WASH ANY CONTAM CLTHG BEFORE REUSE. (ING 2)

Boiling Pt:B.P. Text:399F,204C
Vapor Pres:0.12 @ 25C
Spec Gravity:0.837 (H*2O=1)
Appearance and Odor:LIQUID

Stability Indicator/Materials to Avoid:YES
REACTIVE WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STABLE IF STORED UNDER PROPER CONDITIONS.
AVOID EXCESSIVE HEAT AND LIGHT.
Hazardous Decomposition Products:TOXIC CARBON OXIDES (CARBON MONOXIDE
AND CARBON DIOXIDE).

Waste Disposal Methods:RECYCLE TO PROCESS, IF POSS. CONSULT YOUR
LOC/REGIONAL AUTHORITIES. YOU MAY BE ABLE TO DISSOLVE/MIX MATL
W/COMBUST SOLV & BURN IN CHEM INCIN EQUIPPED W/AFTERBURNER &
SCRUBBER SYS. OBSERVE ALL FED, STA TE & LOC REGS WHEN DISPOSING OF
THIS SUBSTANCE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.